Skip to content 1.Unwind is equipped with independent shaftless hydraulic feeding, which can bear more than 1500kg
2.Pneumatic slip shaft of 3 inches is adopted for unwinding
3.Slitting speed: 400m / min
4.Servo motor drive and PLC system control
5.Equipped with flat knife and round knife, suitable for film and paper slitting
6.There is a receiving platform between the unwindingroom and the main machine, which is convenient for receiving materials
7.Equipped with rubber stick, pressing stick and scratch prevention device
8.The rewind is equipped with automatic detection device of winding diameter
9.After rewinding, it is equipped with automatic blanking device and rotary unloading
Main Technical Parameters
| Machine model | PJGWFQ-C-1300mm | PJGWFQ-C-1500mm | PJGWFQ-C-1800mm |
| Maximum material width | 1300mm | 1500mm | 1800mm |
| Slitting material width | 30-1300mm | 30-1500mm | 30-1800mm |
| Maximum unwinding diameter | Ø1200mm | Ø1200mm | Ø1200mm |
| Maximum rewinding diameter | Ø600mm | Ø600mm | Ø600mm |
| Paper tube inner hole | 3inch | 3inch | 3inch |
| Slitting speed | 50-400 m/min（optional：500-800m/min） | ||
| Edge Deviation correction accuracy | ≤0.1mm | ≤0.1mm | ≤0.1mm |
| Total power (kw) | 22KW | 26KW | 32KW |
| Machine weight (kg) | 4000kg | 4500kg | 4800kg |
| Overall dimension (m) | 2.5×4×1.9 | 2.5×4.2×1.9 | 2.5×4.5×1.9 |
| Other options | 1. Rewinding 6-inch shaft 2. Automatic paper tube of laser spot lamp 3. Automatic tool setting device 4. Motor waste collector | ||
