Skip to content 1.The whole machine is controlled by PC and servo motor control system, and equipped with remote service device, which is convenient to solve problems quickly
2.The color registration adopts automatic computer automatic color registration and HD color still picture monitoring, which is convenient for the observation of printing quality
3.It is applicable to the duplex type of paper unwinding without core, and it is applicable to the automatic unwinding position of + 6 inches; Full automatic roll changing without shutdown, material receiving speed is 300m / min, and the tension before shutdown can be maintained during shutdown. When the machine is started again, it can accurately ensure the overprint accuracy and reduce the waste products caused by overprint error during startup
4.The high-performance deviation correction system is adopted for discharging and deviation correction to ensure the linear stability of the substrate operation process and the end face uniformity of the winding finished product
5.High precision ceramic anilox roller, fully enclosed chamber doctor blade and pneumatic automatic ink pumping system are used for inking
6.The advance and retreat of plate roller and anilox roller are controlled by electric control, which can achieve rapid advance and retreat
7.Applicable ink: water-based ink, solvent ink and UV ink
8.High precision tension sensor, multi-stage tension control; Floating roller detection to ensure accurate and stable printing tension
9.Independent extended oven, electric heating and drying unit, high efficiency and energy saving. Heat transfer oil or steam heating mode can also be selected
10.The rewinding is controlled by variable frequency motor, and the winding is changed automatically without shutdown. The material receiving speed is 300m / min. the tension before shutdown can be maintained when the machine is stopped. When the machine is started again, it can accurately ensure the overprint accuracy, reduce the waste products caused by overprint error when starting up, and hydraulic automatic blanking
Main Technical Parameters
| Model | PJUH-TS-B-650-1650mm |
| Raw material width | 600-1600mm |
| Maximum printing width | 570-1570mm |
| Printing color | 2-10color |
| Printing length range | 360mm-960mm |
| Raw material diameter | Ф1500mm |
| Maximum mechanical speed | 50-260m/min |
| Maximum printing speed | 50-230m/min |
| Printing precision | ± 0.12mm |
| Color registration mode | Fully automatic computer registration |
| Voltage | 3P-380V-50HZ |
| Size | depends on the model |
| Weight | depends on the model |
| Other optional | 1）Fully automatic non-stop unwind&rewind 2）Sleeve anilox roller device 3）Pressure regulation: servo motor control 4）Turning bar device 5）UV and bronzing device 6）Slitting, breaking device |
