Skip to content 1.The whole machine adopts PLC and variable frequency drive control system
2.The unwinding process of the base material and the end face of the finished product shall be in order to ensure the stability of the winding process
3.High precision ceramic anilox roller, fully enclosed chamber doctor blade and pneumatic automatic ink pumping system are used for inking
4.The color registration adopts electric registration and pressure control, and the HD color still picture monitoring is convenient for the observation of printing quality
5.The central drum and central big gear are made of high-precision materials
6.Closed loop constant tension design of high-precision tension sensor ensures accurate and stable printing tension
7.Independent hot air electric heating and drying unit, high efficiency and energy saving. Heat transfer oil or steam heating mode can also be selected
Main Technical Parameters
| Machine model | KSCI-H-850-2850mm |
| Material width | 800-2800mm |
| Printing width | 770-2770mm |
| Printing color | 4-8color |
| Printing length range | 380-860mm |
| Material diameter | Ф600 mm Ф1200mm |
| Mechanical speed | 50-320m/min |
| Printing speed | 50-300m/min(Depending on the substrate) |
| Color registration accuracy | ±0.12mm |
| Color registration mode | Manual registration + motor fine-tuning |
| Machine weight | depends on the model |
| Machine size | depends on the model |
| Working piezoelectric | 3P-380V-50HZ |
|
Other options | 1. No-stop Unwind & Rewind 2. UV device 3. Turning bar device 4. Corona processor device 5. Slitting device |
